Neutrik Xlr
Time Left:
From GROUPON in Orange County
Time Left:
From GROUPON in Orange County
Time Left:
From GROUPON in Orange County
Time Left:
From GROUPON in Las Vegas
Time Left:
From GROUPON in Denver
Time Left:
From GROUPON in Phoenix
Time Left:
From GROUPON in Orange County
Time Left:
From GROUPON in Orange County
Time Left:
From GROUPON in Orange County
Time Left:
From GROUPON in Abilene, TX
Neutrik Xlr
|
|
GLS Audio Rivet Gun Tool w/ 60 Rivets designed for Patch Panels, XLR Jacks, Neutrik Jacks, and more. $14.99 This Rivet Gun designed by GLS Audio is specifically for Rack Patch Panels and Jacks. As you can see from the picture below the tip is the PERFECT size to fit Panel Mount Jacks such as XLR’s, Neutrik’s, 1/4″, etc. Normal rivet guns have a large tip which does not allow the rivet to fit correctly. When using the high quality rivet gun by GLS Audio you will always get a beautifully installed rivet…. |
|
|
Pro Co Studio Wall Plate (Dual 1/4 inch TRS Female) $17.95 These panels have a brushed stainless steel finish and use high-quality Neutrik latching connectors with silver contacts for the cleanest signal path possible…. |
|
|
Neutrik NE8MC-B Ethercon RJ45 Cable Housing Black $2.84 EtherCon ruggedized RJ45 connectors provide solutions for data transfer in harsh demanding environments by offering a cable carrier and receptacle that helps to protect the contacts of the RJ45 connections…. |
|
|
Neutrik NE8FDP Ethercon RJ45 Feed Through Connector $8.85 EtherCon® ruggedized RJ45 connectors provide solutions for data transfer in harsh demanding environments by offering a cable carrier and receptacle that helps to protect the contacts of the RJ45 connections…. |
|
|
GLS Audio 25ft Mic Cable Patch Cords – XLR Male to XLR Female Black Microphone Cables – 25′ Balanced Mike Snake Cord – SINGLE $14.99 Professional Series Noise Free Mic Cables. They have a thick, high quality, flexible rubber jacket. They are heavy duty Noise Free “True Balanced LO-Z” and have 3 pin XLR connectors on each end. These cables have dual insulated copper conductors plus they are shielded. They are hand wired & hand soldered and have high quality metal ends. They have a double strain relief on each end (internal Tri-G… |
|
|
GLS Audio 12ft Mic Cable Patch Cords – XLR Male to XLR Female Black Cables – 12′ Balanced Mike Snake Cord – SINGLE $12.99 Professional Series Noise Free Mic Cables. They have a thick, high quality, flexible rubber jacket. They are heavy duty Noise Free “True Balanced LO-Z” and have 3 pin XLR connectors on each end. These cables have dual insulated copper conductors plus they are shielded. They are hand wired & hand soldered and have high quality metal ends. They have a double strain relief on each end (internal Tri-G… |
|
|
GLS Audio 25ft Mic Cable Cords – XLR Male to XLR Female Colored Cables – 25′ Balanced Mike Cord – 6 PACK $69.95 6 PACK of Professional Series Noise Free Mic Cables. They have a thick, high quality, flexible rubber jacket. They are heavy duty Noise Free “True Balanced LO-Z” and have 3 pin XLR connectors on each end. These cables have dual insulated copper conductors plus they are shielded. They are hand wired & hand soldered and have high quality metal ends. They have a double strain relief on each end (inte… |
|
|
Neutrik XLR Male Right Angle Connector $6.99 Part of the Neutrik RC series, this compact, low profile, right angle cable connector is designed to select any of 7 x 45• positions by rotating the assembled insert into various indents before securing the back cover. This male connector has a nickel finish with silver contacts……… |
|
|
VTG NC3MDL Neutrik XLR Male Connector $6.49 Neutrik D series panel mount male XLR connector (package contains 2 connectors). For mounting an XLR to an amp or mixer…. |
|
|
Crown D-45 D Series Power Amplifier $429.75 An unquestioned long-term standard, D Series amplifiers are found everywhere in the lab, on the road, in public facilities, in the studio and at home. The D-45 has up to 70 watts into 8 ohms of power…. |
|
|
Pro Co Studio Wall Plate (Dual 1/4 inch TRS Female) $17.95 These panels have a brushed stainless steel finish and use high-quality Neutrik latching connectors with silver contacts for the cleanest signal path possible…. |
|
|
Neutrik NE8MC-B Ethercon RJ45 Cable Housing Black $2.84 EtherCon ruggedized RJ45 connectors provide solutions for data transfer in harsh demanding environments by offering a cable carrier and receptacle that helps to protect the contacts of the RJ45 connections…. |
|
|
Neutrik NE8FDP Ethercon RJ45 Feed Through Connector $8.85 EtherCon® ruggedized RJ45 connectors provide solutions for data transfer in harsh demanding environments by offering a cable carrier and receptacle that helps to protect the contacts of the RJ45 connections…. |
|
|
GLS Audio Rivet Gun Tool w/ 60 Rivets designed for Patch Panels, XLR Jacks, Neutrik Jacks, and more. $14.99 This Rivet Gun designed by GLS Audio is specifically for Rack Patch Panels and Jacks. As you can see from the picture below the tip is the PERFECT size to fit Panel Mount Jacks such as XLR’s, Neutrik’s, 1/4″, etc. Normal rivet guns have a large tip which does not allow the rivet to fit correctly. When using the high quality rivet gun by GLS Audio you will always get a beautifully installed rivet…. |
|
|
GLS Audio 25ft Mic Cable Patch Cords – XLR Male to XLR Female Black Microphone Cables – 25′ Balanced Mike Snake Cord – SINGLE $14.99 Professional Series Noise Free Mic Cables. They have a thick, high quality, flexible rubber jacket. They are heavy duty Noise Free “True Balanced LO-Z” and have 3 pin XLR connectors on each end. These cables have dual insulated copper conductors plus they are shielded. They are hand wired & hand soldered and have high quality metal ends. They have a double strain relief on each end (internal Tri-G… |
|
|
GLS Audio 12ft Mic Cable Patch Cords – XLR Male to XLR Female Black Cables – 12′ Balanced Mike Snake Cord – SINGLE $12.99 Professional Series Noise Free Mic Cables. They have a thick, high quality, flexible rubber jacket. They are heavy duty Noise Free “True Balanced LO-Z” and have 3 pin XLR connectors on each end. These cables have dual insulated copper conductors plus they are shielded. They are hand wired & hand soldered and have high quality metal ends. They have a double strain relief on each end (internal Tri-G… |
|
|
GLS Audio 25ft Mic Cable Cords – XLR Male to XLR Female Colored Cables – 25′ Balanced Mike Cord – 6 PACK $69.95 6 PACK of Professional Series Noise Free Mic Cables. They have a thick, high quality, flexible rubber jacket. They are heavy duty Noise Free “True Balanced LO-Z” and have 3 pin XLR connectors on each end. These cables have dual insulated copper conductors plus they are shielded. They are hand wired & hand soldered and have high quality metal ends. They have a double strain relief on each end (inte… |
|
|
Neutrik XLR Male Right Angle Connector $6.99 Part of the Neutrik RC series, this compact, low profile, right angle cable connector is designed to select any of 7 x 45• positions by rotating the assembled insert into various indents before securing the back cover. This male connector has a nickel finish with silver contacts……… |
|
|
VTG NC3MDL Neutrik XLR Male Connector $6.49 Neutrik D series panel mount male XLR connector (package contains 2 connectors). For mounting an XLR to an amp or mixer…. |
|
|
Crown D-45 D Series Power Amplifier $429.75 An unquestioned long-term standard, D Series amplifiers are found everywhere in the lab, on the road, in public facilities, in the studio and at home. The D-45 has up to 70 watts into 8 ohms of power…. |